turn on bluetooth support in config
CONFIG_PACKAGE_kmod-bluetooth=y
CONFIG_PACKAGE_kmod-bluetooth-6lowpan=y
CONFIG_PACKAGE_kmod-btsdio=y
CONFIG_PACKAGE_kmod-btusb=y
CONFIG_PACKAGE_kmod-hci-uart=y
After flashing, install the package bluez-utils, bluez-daemon and check
root@ImmortalWrt:~# hciconfig -a
hci0: Type: Primary Bus: UART
BD Address: XX:XX:XX:XX:XX:XX ACL MTU: 1021:8 SCO MTU: 64:1
UP RUNNING
RX bytes:1234928 acl:0 sco:0 events:34226 errors:0
TX bytes:37082 acl:0 sco:0 commands:420 errors:0
Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH SNIFF
Link mode: PERIPHERAL ACCEPT
Name: 'BlueZ 5.72'
Class: 0x000000
Service Classes: Unspecified
Device Class: Miscellaneous,
HCI Version: 4.0 (0x6) Revision: 0x6a
LMP Version: 4.0 (0x6) Subversion: 0x2209
Manufacturer: Broadcom Corporation (15)
| Name | Value |
|---|---|
| Default IP | 192.168.1.1 |
| Default Account | root |
| Default Password | password |
| Default WIFI Name | OpenWrt |
| Default WIFI Password | None |
The amlogic-s9xxx-openwrt © OPHUB is licensed under the GPL-2.0 license