Installer for OpenLAN Gateway

Project aimed at building ISOs for OpenLAN Gateway

Requirements

• Docker
• Linux or macOS operating system (sorry not sorry Windows)

Building an ISO

1. Run script/build

The result of this will be an ISO in the project working folder.

Installing OpenLAN Gateway

Install from ISO and VyOS VM configuration

• Boot on the ISO, once the install is completed the server will power-off
• Power back the server
• Login to the Linux host with username olgadm and password olgadm
• Edit /opt/staging_scripts/setup-config and adgst the network interface names and if required the VyOS VM sizing parameters
  • You might need to adjust the VyOS rolling release path. Reference: https://github.com/vyos/vyos-nightly-build/releases
• Run the setup script:
  • sudo /opt/staging_scripts/setup-vyos-bridge.sh to use the network bridge method
  • sudo /opt/staging_scripts/setup-vyos-hw-passthru.sh to use the hardware passthru for the network interfaces (WIP)
• Reboot the host
• Connect to the VyOS console with virsh console vyos
• Login with username vyos and password vyos
• Type install image and press Enter.
• Follow the prompts (you can use all defaults)
• Once completed, type reboot to reboot the VM
• For some reason the VyOS VM does not reboot after this first reboot command. You must restart it manually with virsh start vyos

Load the initial factory default configuration

The factory configuration consists of:

• eth0 as the WAN interface in DHCP
• eth1 as the LAN interface
• 3 VLANs:
  • VLAN 100 for the switches
  • VLAN 101 for the APs
  • VLAN 1000 for the guest devices
• Each VLAN has it's own DHCP scope

Here is how to load this configuration:

• Open a console to the VyOS console with virsh console vyos
• If required login with your credentials
• Mound the ISO containing the configs

  sudo mkdir /opt/vyos-configs ; sudo mount /dev/sr1 /opt/vyos-configs
  

• Go in config mode with config
• Load the factory config with:

  source /opt/olg-configs/vyos-factory-config
  commit
  save
  exit
  

Testes platforms

• MinisForum MS-01

Contributing

• Create an issue
• Create a branch and an assoiated PR
• Code
• Ask for review and get your changes merged

Protip

Use the Shipit CLI (https://gitlab.com/intello/shipit-cli-go)

This allows you to create the branch and associated PR in one simple command. The branch and PR will use a standardized naming scheme.