[H7] Update stm32h7xx_hal_conf_default.h

Signed-off-by: Frederic Pillon <[email protected]>

Author: fpistm

system/STM32H7xx/stm32h7xx_hal_conf_default.h

@@ -49,11 +49,13 @@ extern "C" {
 #define HAL_DFSDM_MODULE_ENABLED
 #define HAL_DMA_MODULE_ENABLED
 #define HAL_DMA2D_MODULE_ENABLED
+#define HAL_DTS_MODULE_ENABLED
 #define HAL_DSI_MODULE_ENABLED
 #define HAL_ETH_MODULE_ENABLED
 #define HAL_EXTI_MODULE_ENABLED
 #define HAL_FDCAN_MODULE_ENABLED
 #define HAL_FLASH_MODULE_ENABLED
+#define HAL_GFXMMU_MODULE_ENABLED
 #define HAL_GPIO_MODULE_ENABLED
 #define HAL_HASH_MODULE_ENABLED
 #define HAL_HCD_MODULE_ENABLED
@@ -72,8 +74,11 @@ extern "C" {
 #define HAL_NAND_MODULE_ENABLED
 #define HAL_NOR_MODULE_ENABLED
 #define HAL_OPAMP_MODULE_ENABLED
+#define HAL_OSPI_MODULE_ENABLED
+#define HAL_OTFDEC_MODULE_ENABLED
 #define HAL_PCD_MODULE_ENABLED
 #define HAL_PWR_MODULE_ENABLED
+#define HAL_PSSI_MODULE_ENABLED
 #define HAL_QSPI_MODULE_ENABLED
 #define HAL_RAMECC_MODULE_ENABLED
 #define HAL_RCC_MODULE_ENABLED
@@ -143,6 +148,7 @@ extern "C" {
 #endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
 The real value may vary depending on the variations
 in voltage and temperature.*/
+
 /**
   * @brief External clock source for I2S peripheral
   *        This value is used by the I2S HAL module to compute the I2S clock source
@@ -184,6 +190,7 @@ in voltage and temperature.*/
 #define  USE_HAL_DFSDM_REGISTER_CALLBACKS   0U /* DFSDM register callback disabled   */
 #define  USE_HAL_DMA2D_REGISTER_CALLBACKS   0U /* DMA2D register callback disabled   */
 #define  USE_HAL_DSI_REGISTER_CALLBACKS     0U /* DSI register callback disabled     */
+#define  USE_HAL_DTS_REGISTER_CALLBACKS     0U /* DTS register callback disabled     */
 #define  USE_HAL_ETH_REGISTER_CALLBACKS     0U /* ETH register callback disabled     */
 #define  USE_HAL_FDCAN_REGISTER_CALLBACKS   0U /* FDCAN register callback disabled   */
 #define  USE_HAL_NAND_REGISTER_CALLBACKS    0U /* NAND register callback disabled    */
@@ -192,24 +199,33 @@ in voltage and temperature.*/
 #define  USE_HAL_SRAM_REGISTER_CALLBACKS    0U /* SRAM register callback disabled    */
 #define  USE_HAL_HASH_REGISTER_CALLBACKS    0U /* HASH register callback disabled    */
 #define  USE_HAL_HCD_REGISTER_CALLBACKS     0U /* HCD register callback disabled     */
+#define  USE_HAL_GFXMMU_REGISTER_CALLBACKS  0U /* GFXMMU register callback disabled  */
 #define  USE_HAL_HRTIM_REGISTER_CALLBACKS   0U /* HRTIM register callback disabled   */
 #define  USE_HAL_I2C_REGISTER_CALLBACKS     0U /* I2C register callback disabled     */
 #define  USE_HAL_I2S_REGISTER_CALLBACKS     0U /* I2S register callback disabled     */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS    0U /* IRDA register callback disabled    */
 #define  USE_HAL_JPEG_REGISTER_CALLBACKS    0U /* JPEG register callback disabled    */
 #define  USE_HAL_LPTIM_REGISTER_CALLBACKS   0U /* LPTIM register callback disabled   */
 #define  USE_HAL_LTDC_REGISTER_CALLBACKS    0U /* LTDC register callback disabled    */
 #define  USE_HAL_MDIOS_REGISTER_CALLBACKS   0U /* MDIO register callback disabled    */
+#define  USE_HAL_MMC_REGISTER_CALLBACKS     0U /* MMC register callback disabled     */
 #define  USE_HAL_OPAMP_REGISTER_CALLBACKS   0U /* MDIO register callback disabled    */
+#define  USE_HAL_OSPI_REGISTER_CALLBACKS    0U /* OSPI register callback disabled    */
+#define  USE_HAL_OTFDEC_REGISTER_CALLBACKS  0U /* OTFDEC register callback disabled  */
 #define  USE_HAL_PCD_REGISTER_CALLBACKS     0U /* PCD register callback disabled     */
 #define  USE_HAL_QSPI_REGISTER_CALLBACKS    0U /* QSPI register callback disabled    */
 #define  USE_HAL_RNG_REGISTER_CALLBACKS     0U /* RNG register callback disabled     */
 #define  USE_HAL_RTC_REGISTER_CALLBACKS     0U /* RTC register callback disabled     */
 #define  USE_HAL_SAI_REGISTER_CALLBACKS     0U /* SAI register callback disabled     */
+#define  USE_HAL_SD_REGISTER_CALLBACKS      0U /* SD register callback disabled      */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS  0U /* SMARTCARD register callback disabled */
 #define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
 #define  USE_HAL_SMBUS_REGISTER_CALLBACKS   0U /* SMBUS register callback disabled   */
 #define  USE_HAL_SPI_REGISTER_CALLBACKS     0U /* SPI register callback disabled     */
 #define  USE_HAL_SWPMI_REGISTER_CALLBACKS   0U /* SWPMI register callback disabled   */
 #define  USE_HAL_TIM_REGISTER_CALLBACKS     0U /* TIM register callback disabled     */
+#define  USE_HAL_UART_REGISTER_CALLBACKS    0U /* UART register callback disabled    */
+#define  USE_HAL_USART_REGISTER_CALLBACKS   0U /* USART register callback disabled   */
 #define  USE_HAL_WWDG_REGISTER_CALLBACKS    0U /* WWDG register callback disabled    */
 
 /* ########################### Ethernet Configuration ######################### */
@@ -223,7 +239,6 @@ in voltage and temperature.*/
 #define ETH_MAC_ADDR4    ((uint8_t)0x00)
 #define ETH_MAC_ADDR5    ((uint8_t)0x00)
 
-
 /* ########################## Assert Selection ############################## */
 /**
   * @brief Uncomment the line below to expanse the "assert_param" macro in the
@@ -272,6 +287,10 @@ in voltage and temperature.*/
 #include "stm32h7xx_hal_dfsdm.h"
 #endif /* HAL_DFSDM_MODULE_ENABLED */
 
+#ifdef HAL_DTS_MODULE_ENABLED
+ #include "stm32h7xx_hal_dts.h"
+#endif /* HAL_DTS_MODULE_ENABLED */
+
 #ifdef HAL_ETH_MODULE_ENABLED
 #include "stm32h7xx_hal_eth.h"
 #endif /* HAL_ETH_MODULE_ENABLED */
@@ -316,6 +335,10 @@ in voltage and temperature.*/
 #include "stm32h7xx_hal_flash.h"
 #endif /* HAL_FLASH_MODULE_ENABLED */
 
+#ifdef HAL_GFXMMU_MODULE_ENABLED
+  #include "stm32h7xx_hal_gfxmmu.h"
+#endif /* HAL_GFXMMU_MODULE_ENABLED */
+
 #ifdef HAL_HRTIM_MODULE_ENABLED
 #include "stm32h7xx_hal_hrtim.h"
 #endif /* HAL_HRTIM_MODULE_ENABLED */
@@ -372,6 +395,18 @@ in voltage and temperature.*/
 #include "stm32h7xx_hal_opamp.h"
 #endif /* HAL_OPAMP_MODULE_ENABLED */
 
+#ifdef HAL_OSPI_MODULE_ENABLED
+ #include "stm32h7xx_hal_ospi.h"
+#endif /* HAL_OSPI_MODULE_ENABLED */
+
+#ifdef HAL_OTFDEC_MODULE_ENABLED
+#include "stm32h7xx_hal_otfdec.h"
+#endif /* HAL_OTFDEC_MODULE_ENABLED */
+
+#ifdef HAL_PSSI_MODULE_ENABLED
+ #include "stm32h7xx_hal_pssi.h"
+#endif /* HAL_PSSI_MODULE_ENABLED */
+
 #ifdef HAL_PWR_MODULE_ENABLED
 #include "stm32h7xx_hal_pwr.h"
 #endif /* HAL_PWR_MODULE_ENABLED */
@@ -382,7 +417,7 @@ in voltage and temperature.*/
 
 #ifdef HAL_RAMECC_MODULE_ENABLED
 #include "stm32h7xx_hal_ramecc.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
+#endif /* HAL_RAMECC_MODULE_ENABLED */
 
 #ifdef HAL_RNG_MODULE_ENABLED
 #include "stm32h7xx_hal_rng.h"