please post building instructions for train switch

[jedierikb]

https://www.facebook.com/Pybricks/posts/pfbid02bswyh9dJQ7z9yFra1RAEqmFr6fcASWfRAYmNLcxR9FkaKnKLdFKRv5xpDFMDmuUMl?comment_id=349036371105744&reply_comment_id=865786858360958

[laurensvalk]

Thanks for posting here! Much easier for us to keep track instead of Facebook 😄

We'll try to cover this in our next demo.

[laurensvalk]

cc @KWSmit

[EmperorKabir]

Just to double check, this will be posted on YouTube?

[laurensvalk]

Since I haven't gotten around to posting it yet, let me at least share the magic trick 😄

When you remove the yellow switch handle, you're left with the grey connector that has to be pushed left and right.

I've found that a round technic hole (beam, connector, etc) fits very well around it. From there, you have a lot of possibilities.

Just to double check, this will be posted on YouTube?

Yes, but I'll post at least a link here.

[KWSmit]

This is my best solution so far. Works fine with Medium Angular Motor and Technic Large Motor. I found that the Medium Linear Motor is not strong enough (so you have to use gears to give it more torque).