Magene C506 Support

[RoastPotatoes]

This is a very vague suggestion, but could be a cool adaption for this project.
The Magene C506 bike computer runs an ESP32-S3 closest to the MAKERFABS ESP32S3 currently listed on the project.

There's no protection or encryption on the device so it's entirely flashable has a touchscreen, gps, etc. I haven't opened mine up so I'm currently having issues mapping pinouts...

Detecting chip type... ESP32-S3
Chip is ESP32-S3 (QFN56) (revision v0.2)
Features: WiFi, BLE, Embedded PSRAM 2MB (AP_3v3)
Crystal is 40MHz
MAC: 34:cd:b0:2b:b3:ec
Uploading stub...
Running stub...
Stub running...
Manufacturer: c8
Device: 4018
Detected flash size: 16MB

Display: MidLcd, ST7789, lvgl, Initialize Intel 8080 bus: Uses an ST7789 display controller over an 8080 parallel interface, with LVGL as the UI library.
Touch: FT6X36, CST3240, lvgl_i2c: Uses an FT6x36 or CST3240 touch controller via I2C.

[jgauchia]

Very interesting, It would be nice to know more details like the screen pinout, resolution, PSRAM maybe is

If it's use LVGL, it should not be inconvenient to try to adapt it.
PSRAM seems a little small, but it shouldn't be a problem.

I will do some more research on the Magene C506.

Thank you!