Install problem

[BruceLee0718]

Describe the bug
When I am installing the pycuda, I got the following errors:
Building wheel for pycuda (pyproject.toml) ... error
error: subprocess-exited-with-error

× Building wheel for pycuda (pyproject.toml) did not run successfully.
│ exit code: 1
╰─> [153 lines of output]
*************************************************************
*** I have detected that you have not run configure.py.
*************************************************************
*** Additionally, no global config files were found.
*** I will go ahead with the default configuration.
*** In all likelihood, this will not work out.
***
*** See README_SETUP.txt for more information.
***
*** If the build does fail, just re-run configure.py with the
*** correct arguments, and then retry. Good luck!
*************************************************************
*** HIT Ctrl-C NOW IF THIS IS NOT WHAT YOU WANT
*************************************************************
Continuing in 10 seconds...
Continuing in 9 seconds...
Continuing in 8 seconds...
Continuing in 7 seconds...
Continuing in 6 seconds...
Continuing in 5 seconds...
Continuing in 4 seconds...
Continuing in 3 seconds...
Continuing in 2 seconds...
Continuing in 1 seconds...
running bdist_wheel
running build
running build_py
creating build
creating build/lib.linux-x86_64-cpython-37
creating build/lib.linux-x86_64-cpython-37/pycuda
copying pycuda/_mymako.py -> build/lib.linux-x86_64-cpython-37/pycuda
copying pycuda/autoinit.py -> build/lib.linux-x86_64-cpython-37/pycuda
copying pycuda/driver.py -> build/lib.linux-x86_64-cpython-37/pycuda
copying pycuda/elementwise.py -> build/lib.linux-x86_64-cpython-37/pycuda
copying pycuda/debug.py -> build/lib.linux-x86_64-cpython-37/pycuda
copying pycuda/curandom.py -> build/lib.linux-x86_64-cpython-37/pycuda
copying pycuda/init.py -> build/lib.linux-x86_64-cpython-37/pycuda
copying pycuda/autoprimaryctx.py -> build/lib.linux-x86_64-cpython-37/pycuda
copying pycuda/_cluda.py -> build/lib.linux-x86_64-cpython-37/pycuda
copying pycuda/compiler.py -> build/lib.linux-x86_64-cpython-37/pycuda
copying pycuda/reduction.py -> build/lib.linux-x86_64-cpython-37/pycuda
copying pycuda/scan.py -> build/lib.linux-x86_64-cpython-37/pycuda
copying pycuda/characterize.py -> build/lib.linux-x86_64-cpython-37/pycuda
copying pycuda/gpuarray.py -> build/lib.linux-x86_64-cpython-37/pycuda
copying pycuda/cumath.py -> build/lib.linux-x86_64-cpython-37/pycuda
copying pycuda/tools.py -> build/lib.linux-x86_64-cpython-37/pycuda
creating build/lib.linux-x86_64-cpython-37/pycuda/gl
copying pycuda/gl/autoinit.py -> build/lib.linux-x86_64-cpython-37/pycuda/gl
copying pycuda/gl/init.py -> build/lib.linux-x86_64-cpython-37/pycuda/gl
creating build/lib.linux-x86_64-cpython-37/pycuda/sparse
copying pycuda/sparse/packeted.py -> build/lib.linux-x86_64-cpython-37/pycuda/sparse
copying pycuda/sparse/pkt_build.py -> build/lib.linux-x86_64-cpython-37/pycuda/sparse
copying pycuda/sparse/cg.py -> build/lib.linux-x86_64-cpython-37/pycuda/sparse
copying pycuda/sparse/coordinate.py -> build/lib.linux-x86_64-cpython-37/pycuda/sparse
copying pycuda/sparse/init.py -> build/lib.linux-x86_64-cpython-37/pycuda/sparse
copying pycuda/sparse/inner.py -> build/lib.linux-x86_64-cpython-37/pycuda/sparse
copying pycuda/sparse/operator.py -> build/lib.linux-x86_64-cpython-37/pycuda/sparse
creating build/lib.linux-x86_64-cpython-37/pycuda/compyte
copying pycuda/compyte/init.py -> build/lib.linux-x86_64-cpython-37/pycuda/compyte
copying pycuda/compyte/array.py -> build/lib.linux-x86_64-cpython-37/pycuda/compyte
copying pycuda/compyte/dtypes.py -> build/lib.linux-x86_64-cpython-37/pycuda/compyte
running egg_info
writing pycuda.egg-info/PKG-INFO
writing dependency_links to pycuda.egg-info/dependency_links.txt
writing requirements to pycuda.egg-info/requires.txt
writing top-level names to pycuda.egg-info/top_level.txt
reading manifest file 'pycuda.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
/tmp/pip-build-env-ad4u47ee/overlay/lib/python3.7/site-packages/setuptools/_distutils/dist.py:265: UserWarning: Unknown distribution option: 'test_requires'
warnings.warn(msg)
warning: no files found matching 'doc/source/.rst'
warning: no files found matching 'doc/source/conf.py'
warning: no files found matching 'doc/source/_static/.css'
warning: no files found matching 'doc/source/_templates/.html'
warning: no files found matching '.cpp' under directory 'bpl-subset/bpl_subset/boost'
warning: no files found matching '.html' under directory 'bpl-subset/bpl_subset/boost'
warning: no files found matching '.inl' under directory 'bpl-subset/bpl_subset/boost'
warning: no files found matching '.txt' under directory 'bpl-subset/bpl_subset/boost'
warning: no files found matching '.h' under directory 'bpl-subset/bpl_subset/libs'
warning: no files found matching '.ipp' under directory 'bpl-subset/bpl_subset/libs'
warning: no files found matching '.pl' under directory 'bpl-subset/bpl_subset/libs'
adding license file 'LICENSE'
writing manifest file 'pycuda.egg-info/SOURCES.txt'
creating build/lib.linux-x86_64-cpython-37/pycuda/cuda
copying pycuda/cuda/pycuda-complex-impl.hpp -> build/lib.linux-x86_64-cpython-37/pycuda/cuda
copying pycuda/cuda/pycuda-complex.hpp -> build/lib.linux-x86_64-cpython-37/pycuda/cuda
copying pycuda/cuda/pycuda-helpers.hpp -> build/lib.linux-x86_64-cpython-37/pycuda/cuda
copying pycuda/sparse/pkt_build_cython.pyx -> build/lib.linux-x86_64-cpython-37/pycuda/sparse
running build_ext
building '_driver' extension
creating build/temp.linux-x86_64-cpython-37
creating build/temp.linux-x86_64-cpython-37/bpl-subset
creating build/temp.linux-x86_64-cpython-37/bpl-subset/bpl_subset
creating build/temp.linux-x86_64-cpython-37/bpl-subset/bpl_subset/libs
creating build/temp.linux-x86_64-cpython-37/bpl-subset/bpl_subset/libs/python
creating build/temp.linux-x86_64-cpython-37/bpl-subset/bpl_subset/libs/python/src
creating build/temp.linux-x86_64-cpython-37/bpl-subset/bpl_subset/libs/python/src/converter
creating build/temp.linux-x86_64-cpython-37/bpl-subset/bpl_subset/libs/python/src/object
creating build/temp.linux-x86_64-cpython-37/bpl-subset/bpl_subset/libs/smart_ptr
creating build/temp.linux-x86_64-cpython-37/bpl-subset/bpl_subset/libs/smart_ptr/src
creating build/temp.linux-x86_64-cpython-37/bpl-subset/bpl_subset/libs/system
creating build/temp.linux-x86_64-cpython-37/bpl-subset/bpl_subset/libs/system/src
creating build/temp.linux-x86_64-cpython-37/bpl-subset/bpl_subset/libs/thread
creating build/temp.linux-x86_64-cpython-37/bpl-subset/bpl_subset/libs/thread/src
creating build/temp.linux-x86_64-cpython-37/bpl-subset/bpl_subset/libs/thread/src/pthread
creating build/temp.linux-x86_64-cpython-37/src
creating build/temp.linux-x86_64-cpython-37/src/cpp
creating build/temp.linux-x86_64-cpython-37/src/wrapper
gcc -pthread -B /home/server/anaconda3/envs/GLAD/compiler_compat -Wl,--sysroot=/ -Wsign-compare -fwrapv -Wall -O3 -DNDEBUG -fPIC -DBOOST_ALL_NO_LIB=1 -DBOOST_THREAD_BUILD_DLL=1 -DBOOST_MULTI_INDEX_DISABLE_SERIALIZATION=1 -DBOOST_PYTHON_SOURCE=1 -Dboost=pycudaboost -DBOOST_THREAD_DONT_USE_CHRONO=1 -DPYGPU_PACKAGE=pycuda -DPYGPU_PYCUDA=1 -DHAVE_CURAND=1 -Isrc/cpp -Ibpl-subset/bpl_subset -I/usr/local/cuda/include -I/tmp/pip-build-env-ad4u47ee/overlay/lib/python3.7/site-packages/numpy/core/include -I/home/server/anaconda3/envs/GLAD/include/python3.7m -c bpl-subset/bpl_subset/libs/python/src/converter/arg_to_python_base.cpp -o build/temp.linux-x86_64-cpython-37/bpl-subset/bpl_subset/libs/python/src/converter/arg_to_python_base.o
cc1plus: error: unrecognized command-line option ‘-auxbase-strip’
cc1plus: error: too many filenames given; type ‘cc1plus --help’ for usage
/tmp/pip-build-env-ad4u47ee/overlay/lib/python3.7/site-packages/setuptools/command/build_py.py:201: _Warning: Package 'pycuda.cuda' is absent from the packages configuration.
!!

          ********************************************************************************
          ############################
          # Package would be ignored #
          ############################
          Python recognizes 'pycuda.cuda' as an importable package[^1],
          but it is absent from setuptools' `packages` configuration.
  
          This leads to an ambiguous overall configuration. If you want to distribute this
          package, please make sure that 'pycuda.cuda' is explicitly added
          to the `packages` configuration field.
  
          Alternatively, you can also rely on setuptools' discovery methods
          (for example by using `find_namespace_packages(...)`/`find_namespace:`
          instead of `find_packages(...)`/`find:`).
  
          You can read more about "package discovery" on setuptools documentation page:
  
          - https://setuptools.pypa.io/en/latest/userguide/package_discovery.html
  
          If you don't want 'pycuda.cuda' to be distributed and are
          already explicitly excluding 'pycuda.cuda' via
          `find_namespace_packages(...)/find_namespace` or `find_packages(...)/find`,
          you can try to use `exclude_package_data`, or `include-package-data=False` in
          combination with a more fine grained `package-data` configuration.
  
          You can read more about "package data files" on setuptools documentation page:
  
          - https://setuptools.pypa.io/en/latest/userguide/datafiles.html
  
  
          [^1]: For Python, any directory (with suitable naming) can be imported,
                even if it does not contain any `.py` files.
                On the other hand, currently there is no concept of package data
                directory, all directories are treated like packages.
          ********************************************************************************
  
  !!
    check.warn(importable)
  error: command '/usr/bin/gcc' failed with exit code 1
  [end of output]

note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for pycuda
Failed to build pycuda
ERROR: Could not build wheels for pycuda, which is required to install pyproject.toml-based projects

To Reproduce
Steps to reproduce the behavior:

1. Go to '...'
2. Click on '....'
3. Scroll down to '....'
4. See error

Expected behavior
A clear and concise description of what you expected to happen.

Environment (please complete the following information):

• OS:Ubuntu22.04 server [e.g. iOS]
• CUDA version: 11.1 [e.g. 11.1]
• CUDA driver version:535.171.04 [e.g. 470.86]
• PyCUDA version: 2021.1 [e.g 2021.1]
• Python version:3.7 [e.g. 3.10]

Additional context
Add any other context about the problem here.

[inducer]

Please test that your gcc can successfully compile C++ code.