diff --git a/boards.txt b/boards.txt
index 5104f80101d..9087ff2ab50 100644
--- a/boards.txt
+++ b/boards.txt
@@ -184,6 +184,9 @@ esp32s3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
esp32s3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9MB FATFS)
esp32s3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
esp32s3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
+esp32s3.menu.PartitionScheme.rainmaker=RainMaker
+esp32s3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
+esp32s3.menu.PartitionScheme.rainmaker.upload.maximum_size=3145728
esp32s3.menu.CPUFreq.240=240MHz (WiFi)
esp32s3.menu.CPUFreq.240.build.f_cpu=240000000L
@@ -304,6 +307,9 @@ esp32c3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
esp32c3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9MB FATFS)
esp32c3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
esp32c3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
+esp32c3.menu.PartitionScheme.rainmaker=RainMaker
+esp32c3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
+esp32c3.menu.PartitionScheme.rainmaker.upload.maximum_size=3145728
esp32c3.menu.CPUFreq.160=160MHz (WiFi)
esp32c3.menu.CPUFreq.160.build.f_cpu=160000000L
@@ -475,6 +481,9 @@ esp32s2.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
esp32s2.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9MB FATFS)
esp32s2.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
esp32s2.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
+esp32s2.menu.PartitionScheme.rainmaker=RainMaker
+esp32s2.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
+esp32s2.menu.PartitionScheme.rainmaker.upload.maximum_size=3145728
esp32s2.menu.CPUFreq.240=240MHz (WiFi)
esp32s2.menu.CPUFreq.240.build.f_cpu=240000000L
diff --git a/libraries/RainMaker/examples/README.md b/libraries/RainMaker/examples/README.md
index 6c5bded09ac..0b978040085 100644
--- a/libraries/RainMaker/examples/README.md
+++ b/libraries/RainMaker/examples/README.md
@@ -1,10 +1,13 @@
# ESP RainMaker Examples
While building any examples for ESP RainMaker, take care of the following:
+
1. Change partition scheme in Arduino IDE to RainMaker (Tools -> Partition Scheme -> RainMaker).
2. Once ESP RainMaker gets started, compulsorily call `WiFi.beginProvision()` which is responsible for user-node mapping.
-3. Use appropriate provisioning scheme as per the board.
+3. Use the appropriate provisioning scheme as per the board.
- ESP32 Board: BLE Provisioning
- - ESP32S2 Board: SoftAP Provisioning
-4. Set debug level to Info (Tools -> Core Debug Level -> Info). This is recommended, but not mandatory.
+ - ESP32-C3 Board: BLE Provisioning
+ - ESP32-S3 Board: BLE Provisioning
+ - ESP32-S2 Board: SoftAP Provisioning
+4. Set debug level to Info (Tools -> Core Debug Level -> Info). This is recommended debug level but not mandatory to run RainMaker.
diff --git a/libraries/RainMaker/examples/RMakerCustom/RMakerCustom.ino b/libraries/RainMaker/examples/RMakerCustom/RMakerCustom.ino
index 55012e413c6..892f285415f 100644
--- a/libraries/RainMaker/examples/RMakerCustom/RMakerCustom.ino
+++ b/libraries/RainMaker/examples/RMakerCustom/RMakerCustom.ino
@@ -9,10 +9,15 @@ const char *service_name = "PROV_1234";
const char *pop = "abcd1234";
//GPIO for push button
-static int gpio_0 = 0;
+#if CONFIG_IDF_TARGET_ESP32C3
+static int gpio_0 = 9;
+static int gpio_dimmer = 7;
+#else
//GPIO for virtual device
+static int gpio_0 = 0;
static int gpio_dimmer = 16;
-/* Variable for reading pin status*/
+#endif
+
bool dimmer_state = true;
// The framework provides some standard device types like switch, lightbulb, fan, temperature sensor.
@@ -23,12 +28,12 @@ void sysProvEvent(arduino_event_t *sys_event)
{
switch (sys_event->event_id) {
case ARDUINO_EVENT_PROV_START:
-#if CONFIG_IDF_TARGET_ESP32
- Serial.printf("\nProvisioning Started with name \"%s\" and PoP \"%s\" on BLE\n", service_name, pop);
- printQR(service_name, pop, "ble");
-#else
+#if CONFIG_IDF_TARGET_ESP32S2
Serial.printf("\nProvisioning Started with name \"%s\" and PoP \"%s\" on SoftAP\n", service_name, pop);
printQR(service_name, pop, "softap");
+#else
+ Serial.printf("\nProvisioning Started with name \"%s\" and PoP \"%s\" on BLE\n", service_name, pop);
+ printQR(service_name, pop, "ble");
#endif
break;
}
@@ -89,10 +94,10 @@ void setup()
RMaker.start();
WiFi.onEvent(sysProvEvent);
-#if CONFIG_IDF_TARGET_ESP32
- WiFiProv.beginProvision(WIFI_PROV_SCHEME_BLE, WIFI_PROV_SCHEME_HANDLER_FREE_BTDM, WIFI_PROV_SECURITY_1, pop, service_name);
-#else
+#if CONFIG_IDF_TARGET_ESP32S2
WiFiProv.beginProvision(WIFI_PROV_SCHEME_SOFTAP, WIFI_PROV_SCHEME_HANDLER_NONE, WIFI_PROV_SECURITY_1, pop, service_name);
+#else
+ WiFiProv.beginProvision(WIFI_PROV_SCHEME_BLE, WIFI_PROV_SCHEME_HANDLER_FREE_BTDM, WIFI_PROV_SECURITY_1, pop, service_name);
#endif
}
diff --git a/libraries/RainMaker/examples/RMakerSwitch/RMakerSwitch.ino b/libraries/RainMaker/examples/RMakerSwitch/RMakerSwitch.ino
index e486bd200fb..11f11a586bd 100644
--- a/libraries/RainMaker/examples/RMakerSwitch/RMakerSwitch.ino
+++ b/libraries/RainMaker/examples/RMakerSwitch/RMakerSwitch.ino
@@ -8,9 +8,15 @@ const char *service_name = "PROV_1234";
const char *pop = "abcd1234";
//GPIO for push button
-static int gpio_0 = 0;
+#if CONFIG_IDF_TARGET_ESP32C3
+static int gpio_0 = 9;
+static int gpio_switch = 7;
+#else
//GPIO for virtual device
+static int gpio_0 = 0;
static int gpio_switch = 16;
+#endif
+
/* Variable for reading pin status*/
bool switch_state = true;
@@ -21,13 +27,13 @@ void sysProvEvent(arduino_event_t *sys_event)
{
switch (sys_event->event_id) {
case ARDUINO_EVENT_PROV_START:
-#if CONFIG_IDF_TARGET_ESP32
- Serial.printf("\nProvisioning Started with name \"%s\" and PoP \"%s\" on BLE\n", service_name, pop);
- printQR(service_name, pop, "ble");
-#else
+#if CONFIG_IDF_TARGET_ESP32S2
Serial.printf("\nProvisioning Started with name \"%s\" and PoP \"%s\" on SoftAP\n", service_name, pop);
printQR(service_name, pop, "softap");
-#endif
+#else
+ Serial.printf("\nProvisioning Started with name \"%s\" and PoP \"%s\" on BLE\n", service_name, pop);
+ printQR(service_name, pop, "ble");
+#endif
break;
}
}
@@ -74,10 +80,10 @@ void setup()
RMaker.start();
WiFi.onEvent(sysProvEvent);
-#if CONFIG_IDF_TARGET_ESP32
- WiFiProv.beginProvision(WIFI_PROV_SCHEME_BLE, WIFI_PROV_SCHEME_HANDLER_FREE_BTDM, WIFI_PROV_SECURITY_1, pop, service_name);
-#else
+#if CONFIG_IDF_TARGET_ESP32S2
WiFiProv.beginProvision(WIFI_PROV_SCHEME_SOFTAP, WIFI_PROV_SCHEME_HANDLER_NONE, WIFI_PROV_SECURITY_1, pop, service_name);
+#else
+ WiFiProv.beginProvision(WIFI_PROV_SCHEME_BLE, WIFI_PROV_SCHEME_HANDLER_FREE_BTDM, WIFI_PROV_SECURITY_1, pop, service_name);
#endif
}