W5500 crash : Stack canary watchpoint triggered (w5500_tsk)

[tresler]

Board

ESP32-S3

Device Description

own ESP32s3-wroom LED output schema

Hardware Configuration

#define ETH_PHY_TYPE ETH_PHY_W5500
#define ETH_PHY_ADDR 1
#define ETH_PHY_CS 10
#define ETH_PHY_IRQ 9
#define ETH_PHY_RST 14
#define ETH_PHY_SPI_HOST SPI2_HOST
#define ETH_PHY_SPI_SCK 12
#define ETH_PHY_SPI_MISO 13
#define ETH_PHY_SPI_MOSI 11

Version

latest master (checkout manually)

IDE Name

Arduino IDE 2.3.2

Operating System

Ubuntu 24.04

Flash frequency

240MHz

PSRAM enabled

yes

Upload speed

115200

Description

I have problem with <ETH.h> and W5500. I use W5500-io modul and everything running fine (elegantOTA, async webserver, artnet, sacn) until I send more package from lighting console. No matter if it by sACN or ArtNet. If I use WiFi and send everything running without crash, but after I switch to Ethernet it send me this and restart ESP.

Sketch

#include <WiFi.h>
#include <ETH.h>
#include <ArtnetETH.h>
#include <sACN.h>

void setup() {
  Network.onEvent(onEvent);
  WiFi.begin(); 
  WiFi.mode(WIFI_AP);
  WiFi.softAP(ssid_ap, password_ap);
  WiFi.softAPConfig(WIFI_IP_ADDR, AP_GATEWAY_IP, AP_NETWORK_MASK);  

  ETH.begin(ETH_PHY_TYPE, ETH_PHY_ADDR, mac, ETH_PHY_CS, ETH_PHY_IRQ, ETH_PHY_RST, ETH_PHY_SPI_HOST, ETH_PHY_SPI_SCK, ETH_PHY_SPI_MISO, ETH_PHY_SPI_MOSI);

  if (d_prt == "sACN") {
    Serial.println("Startuji sACN");
    recv.callbackDMX(sAcnDmxReceived);
    recv.callbackSource(newSource);
    recv.callbackFramerate(framerate);
    recv.callbackTimeout(timeOut);
    recv.begin(d_unv, false);  
  } else if (d_prt == "ArtNet") {
    Serial.println("Startuji ArtNet");
    artnet.begin();
    artnet.subscribeArtDmxUniverse(net, subnet, d_unv-1, callback);  
  }
}

void loop() {
  if (d_prt == "sACN") {
    recv.receive();
  } else if (d_prt == "ArtNet") {
    artnet.parse();
  }
}

Debug Message

Guru Meditation Error: Core  1 panic'ed (Unhandled debug exception). 
Debug exception reason: Stack canary watchpoint triggered (w5500_tsk) 
Core  1 register dump:
PC      : 0x40380712  PS      : 0x00060236  A0      : 0x8037de72  A1      : 0x3fcad920  
A2      : 0x3fcad298  A3      : 0xffffffff  A4      : 0x00060223  A5      : 0x00060223  
A6      : 0xb33fffff  A7      : 0xb33fffff  A8      : 0x80377b30  A9      : 0x3fcad900  
A10     : 0x3fcad24c  A11     : 0x00000804  A12     : 0x00000001  A13     : 0x00000004  
A14     : 0x0000180c  A15     : 0x3fca6b28  SAR     : 0x00000004  EXCCAUSE: 0x00000001  
EXCVADDR: 0x00000000  LBEG    : 0x400556d5  LEND    : 0x400556e5  LCOUNT  : 0xfffffffd  


Backtrace: 0x4038070f:0x3fcad920 0x4037de6f:0x3fcad950 0x4037e005:0x3fcad970 0x4037e22c:0x3fcad990 0x40378a9e:0x3fcad9b0 0x40378ae2:0x3fcad9d0 0x40378c09:0x3fcada10 0x4202ee8d:0x3fcada30 0x4202dd75:0x3fcada60 0x4202d791:0x3fcada80 0x420b19cd:0x3fcadaa0 0x420afea5:0x3fcadac0 0x420aff2a:0x3fcadae0 0x420b0ccf:0x3fcadb10 0x420c0c4f:0x3fcadb40 0x420b9fba:0x3fcadb60 0x420ba125:0x3fcade80 0x420cce75:0x3fcadeb0 0x4206fc97:0x3fcadee0 0x4206fcbd:0x3fcadf10 0x4205d0b5:0x3fcadf60 0x4038060e:0x3fcadfa0

Other Steps to Reproduce

No response

I have checked existing issues, online documentation and the Troubleshooting Guide

• I confirm I have checked existing issues, online documentation and Troubleshooting guide.

[lbernstone]

@me-no-dev Maybe need to expose some parameter for rx_task_stack_size in https://github.com/espressif/arduino-esp32/blob/master/libraries/Ethernet/src/ETH.cpp#L168?

[me-no-dev]

Thanks @lbernstone . Feature added here: #10003

[tresler]

Thanks for helping @me-no-dev and @lbernstone. Unfortunately now I have after few second new error:

E (198396) w5500.mac: received frame was truncated

or I have :

ETH Disconnected
Timeout!
E (70870) w5500.mac: emac_w5500_transmit(577): free size (0) < send length (350)
ETH Connected
E (71371) w5500.mac: emac_w5500_transmit(577): free size (0) < send length (350)
E (72372) w5500.mac: emac_w5500_transmit(577): free size (0) < send length (350)