Flash write error -1 has occurred #165
Description
I get the error "Flash write error -1" every time I try to upload to Digispark. Everything worked before, e.g. blinking led, leds in series, DigiKeyboard... I uploaded my code about 50-100 times. But suddenly even this empty code got unable to upload:
void setup() {}
void loop() {}
So I press "Upload" and then plug my Digispark. I get this output:
Sketch uses 302 bytes (5%) of program storage space. Maximum is 6012 bytes.
Global variables use 9 bytes of dynamic memory.
Running Digispark Uploader...
Plug in device now... (will timeout in 60 seconds)
> Please plug in the device ...
> Press CTRL+C to terminate the program.
> Device is found!
connecting: 16% complete
connecting: 22% complete
connecting: 28% complete
connecting: 33% complete
> Device has firmware version 1.6
> Available space for user applications: 6012 bytes
> Suggested sleep time between sending pages: 8ms
> Whole page count: 94 page size: 64
> Erase function sleep duration: 752ms
parsing: 50% complete
> Erasing the memory ...
erasing: 55% complete
erasing: 60% complete
erasing: 65% complete
> Starting to upload ...
>> Flash write error -1 has occured ...
>> Please unplug the device and restart the program.
I tried to restart (and reinstall) the Arduino IDE, reboot my PC, switch USB port where I plug digispark, try from Windows (instead of Linux), I still get the same error.
Other details:
Arduino IDE v2.3.1
Manjaro (Arch) Linux x86
Board I've chosen:
