Single to double quotes, plus fixups for tests, flake8

Author: LukeDRussell

boards/Pico87/main.py

@@ -1,5 +1,4 @@
 import board
-
 from kb import KMKKeyboard
 
 from kmk.extensions.lock_status import LockStatus
@@ -23,7 +22,9 @@ def set_lock_leds(self):
             Pico87.leds.set_brightness(0, leds=[1])
 
     def after_hid_send(self, sandbox):
-        super().after_hid_send(sandbox)  # Critically important. Removing this will break lock status.
+        super().after_hid_send(
+            sandbox
+        )  # Critically important. Removing this will break lock status.
 
         if self.report_updated:
             self.set_lock_leds()
@@ -36,8 +37,10 @@ def after_hid_send(self, sandbox):
 MOLYR = KC.MO(1)
 
 # Make this for better looking formatting...
-______ = 'NO'
+______ = "NO"
 
+# flake8: noqa
+# fmt: off
 Pico87.keymap = [[
   # Layer 0 QWERTY
     'ESC', ______,   'F1',   'F2',   'F3',   'F4', ______,   'F5',   'F6',   'F7',   'F8',   'F9',  'F10',  'F11',  'F12', 'PSCR', 'SLCK', 'PAUS',
@@ -55,6 +58,7 @@ def after_hid_send(self, sandbox):
    ______, 'LSFT',    'Z',    'X',    'C',    'V',    'B',    'N',    'M', 'COMM',  'DOT', 'SLSH', ______, 'RSFT', ______, ______,   'UP', ______,
    'LCTL', 'LGUI', ______, 'LALT', ______, ______,  'SPC', ______, ______, ______, 'RALT', 'RGUI', ______,  MOLYR, 'RCTL', 'LEFT', 'DOWN', 'RGHT',
 ]]
+# fmt: on
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     Pico87.go()

boards/anavi/knob1/code.py

@@ -19,7 +19,7 @@
 encoder_handler.map = (((KC.VOLD, KC.VOLU, KC.MUTE),),)
 knob.modules.append(encoder_handler)
 
-print('ANAVI Knob 1')
+print("ANAVI Knob 1")
 
 rgb_ext = RGB(
     pixel_pin=board.NEOPIXEL,
@@ -32,5 +32,5 @@
 
 knob.keymap = [[KC.MUTE]]
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     knob.go()

boards/anavi/knobs3/code.py

@@ -25,7 +25,7 @@
 )
 knob.modules.append(encoder_handler)
 
-print('ANAVI Knobs 3')
+print("ANAVI Knobs 3")
 
 rgb_ext = RGB(
     pixel_pin=board.NEOPIXEL,
@@ -38,5 +38,5 @@
 
 knob.keymap = [[KC.MUTE]]
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     knob.go()

boards/anavi/macro-pad-10/code.py

@@ -8,7 +8,7 @@
 from kmk.modules.encoder import EncoderHandler
 from kmk.scanners import DiodeOrientation
 
-print('ANAVI Macro Pad 10')
+print("ANAVI Macro Pad 10")
 
 keyboard = KMKKeyboard()
 led_ext = LED(
@@ -82,5 +82,5 @@
 encoder_handler.map = (((KC.VOLD, KC.VOLU, KC.MUTE),),)
 keyboard.modules.append(encoder_handler)
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     keyboard.go()

boards/atreus62/main.py

@@ -1,5 +1,4 @@
 import board
-
 from kb import KMKKeyboard
 
 from kmk.handlers.sequences import send_string, simple_key_sequence
@@ -174,6 +173,8 @@
 
 
 # make keymap
+# flake8: noqa
+# fmt: off
 keyboard.keymap = [
     [  # qwerty
         KC.ESC,    KC.N1,     KC.N2,     KC.N3,     KC.N4,     KC.N5,          KC.N6,     KC.N7,     KC.N8,     KC.N9,     KC.N0,     KC.MINS,
@@ -200,7 +201,7 @@
         XXXXXXX,   XXXXXXX,   XXXXXXX,   XXXXXXX,   XXXXXXX,   KC.TRNS,        KC.TRNS,   XXXXXXX,   XXXXXXX,   XXXXXXX,   XXXXXXX,   XXXXXXX,
     ],
 ]
-
+# fmt: on
 
 #  for use in the encoder extension
 encoder_map = [
@@ -219,5 +220,5 @@
     ],
 ]
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     keyboard.go()

boards/boardsource/3x4/main.py

@@ -14,6 +14,8 @@
 
 RAISE = KC.MO(1)
 
+# flake8: noqa
+# fmt: off
 keyboard.keymap = [
     [  #Base
         KC.N0,  KC.N1,  KC.N4,  KC.N7,
@@ -26,6 +28,7 @@
         _______, _______, _______, _______
     ]
 ]
+# fmt: on
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     keyboard.go()

boards/boardsource/4x12/main.py

@@ -19,6 +19,8 @@
 LOWER = KC.MO(1)
 RAISE = KC.MO(2)
 
+# flake8: noqa
+# fmt:off
 keyboard.keymap = [
     [  #QWERTY
         KC.TAB,  KC.Q,    KC.W,    KC.E,    KC.R,    KC.T,    KC.Y,    KC.U,    KC.I,    KC.O,    KC.P,    KC.BSPC,
@@ -39,6 +41,7 @@
         _______, _______, _______, _______, _______, _______, _______, _______, KC.MNXT, KC.VOLD, KC.VOLU, KC.MPLY
     ]
 ]
+# fmt: on
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     keyboard.go()

boards/boardsource/5x12/main.py

@@ -19,6 +19,8 @@
 LOWER = KC.MO(1)
 RAISE = KC.MO(2)
 
+# flake8: noqa
+# fmt: off
 keyboard.keymap = [
     [  #QWERTY
         KC.GRV,  KC.N1,   KC.N2,   KC.N3,   KC.N4,   KC.N5,   KC.N6,   KC.N7,   KC.N8,   KC.N9,   KC.N0,   KC.BSPC,
@@ -42,6 +44,7 @@
         _______, _______, _______, _______, _______, _______, _______, _______, KC.MNXT, KC.VOLD, KC.VOLU, KC.MPLY
     ]
 ]
+# fmt: on
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     keyboard.go()

boards/boardsource/Lulu/kb.py

@@ -12,20 +12,21 @@ def __init__(self):
         self.matrix = [
             MatrixScanner(
                 # required arguments:
-                column_pins = self.col_pins,
-                row_pins = self.row_pins,
+                column_pins=self.col_pins,
+                row_pins=self.row_pins,
                 # optional arguments with defaults:
                 columns_to_anodes=DiodeOrientation.COL2ROW,
                 interval=0.02,
-                max_events=64
+                max_events=64,
             ),
             RotaryioEncoder(
                 pin_a=board.GP08,
                 pin_b=board.GP09,
                 # optional
                 divisor=4,
-            )
+            ),
         ]
+
     col_pins = (
         board.GP02,
         board.GP03,
@@ -43,12 +44,13 @@ def __init__(self):
     data_pin = board.RX
     rgb_pixel_pin = board.GP29
     i2c = board.I2C
-    SCL=board.SCL
-    SDA=board.SDA
-    encoder_a=board.GP08
-    encoder_b=board.GP09
-    # NOQA
+    SCL = board.SCL
+    SDA = board.SDA
+    encoder_a = board.GP08
+    encoder_b = board.GP09
+
     # flake8: noqa
+    # fmt: off
     led_key_pos =[11,10,9 ,8 ,7 ,6 ,      41,42,43,44,45,46,
                 12,13,14,15,16,17,      52,51,50,49,48,47,
                 23,22,21,20,19,18,      53,54,55,56,57,58,
@@ -57,11 +59,12 @@ def __init__(self):
                          3 ,4 ,5 ,      40,39,38,
                          2 ,1 ,0 ,      35,36,37
                          ]
+    # fmt: on
     brightness_limit = 0.5
     num_pixels = 70
 
-    # NOQA
     # flake8: noqa
+    # fmt: off
     coord_mapping = [
      0,  1,  2,  3,  4,  5,         37, 36, 35, 34, 33, 32,
      6,  7,  8,  9, 10, 11,         43, 42, 41, 40, 39, 38,
@@ -70,4 +73,4 @@ def __init__(self):
              25,26, 27, 28,         60, 59, 58, 57,
                     30,31,          62,63 
     ]
-
+    # fmt: on

boards/boardsource/Lulu/main.py

@@ -1,5 +1,4 @@
 import supervisor
-
 from kb import KMKKeyboard
 
 from kmk.extensions.peg_oled_Display import (
@@ -24,18 +23,18 @@
 
 oled_ext = Oled(
     OledData(
-        corner_one={0: OledReactionType.STATIC, 1: ['qwertyzzzz']},
+        corner_one={0: OledReactionType.STATIC, 1: ["qwertyzzzz"]},
         corner_two={
             0: OledReactionType.LAYER,
-            1: ['1', '2', '3', '4', '5', '6', '7', '8'],
+            1: ["1", "2", "3", "4", "5", "6", "7", "8"],
         },
         corner_three={
             0: OledReactionType.LAYER,
-            1: ['base', 'raise', 'lower', 'adjust', '5', '6', '7', '8'],
+            1: ["base", "raise", "lower", "adjust", "5", "6", "7", "8"],
         },
         corner_four={
             0: OledReactionType.LAYER,
-            1: ['qwertyzzz', 'nums', 'shifted', 'leds', '5', '6', '7', '8'],
+            1: ["qwertyzzz", "nums", "shifted", "leds", "5", "6", "7", "8"],
         },
     ),
     toDisplay=OledDisplayMode.TXT,
@@ -129,6 +128,8 @@
 split = Split(data_pin=keyboard.rx, data_pin2=keyboard.tx, uart_flip=False)
 keyboard.modules.append(split)
 
+# flake8: noqa
+# fmt: off
 keyboard.keymap = [
     [
         KC.ESC,  KC.N1,   KC.N2,   KC.N3,    KC.N4,   KC.N5,                    KC.N6,   KC.N7,    KC.N8,   KC.N9, KC.N0,    KC.GRV,
@@ -226,5 +227,7 @@
         KC.TRNS,
     ],
 ]
-if __name__ == '__main__':
+# fmt: on
+
+if __name__ == "__main__":
     keyboard.go(hid_type=HIDModes.USB)

boards/boardsource/microdox/kb.py

@@ -16,9 +16,11 @@ class KMKKeyboard(_KMKKeyboard):
 
     # NOQA
     # flake8: noqa
+    # fmt: off
     coord_mapping = [
      0,  1,  2,  3,  4,  20, 21, 22, 23, 24,
      5,  6,  7,  8,  9,  25, 26, 27, 28, 29,
     10, 11, 12, 13, 14,  30, 31, 32, 33, 34,
             17, 18, 19,  35, 36, 37,
     ]
+    # fmt: on

boards/boardsource/microdox/main.py

@@ -30,6 +30,8 @@
 RGB_VAI = KC.RGB_VAI
 RGB_VAD = KC.RGB_VAD
 
+# flake8: noqa
+# fmt: off
 keyboard.keymap = [
     [  #QWERTY
         KC.Q,    KC.W,    KC.E,    KC.R,    KC.T,                         KC.Y,    KC.U,    KC.I,    KC.O,   KC.P,\
@@ -50,6 +52,7 @@
                             XXXXXXX, XXXXXXX, XXXXXXX,      KC.ENT,  XXXXXXX, KC.DEL
     ]
 ]
+# fmt: on
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     keyboard.go()

boards/crkbd/kb.py

@@ -21,10 +21,11 @@ class KMKKeyboard(_KMKKeyboard):
     powersave_pin = board.P0_13
 
     # flake8: noqa
+    # fmt: off
     coord_mapping = [
      0,  1,  2,  3,  4,  5,  29, 28, 27, 26, 25, 24,
      6,  7,  8,  9, 10, 11,  35, 34, 33, 32, 31, 30,
     12, 13, 14, 15, 16, 17,  41, 40, 39, 38, 37, 36,
                 21, 22, 23,  47, 46, 45,
     ]
-
+    # fmt: on

boards/crkbd/kb_rp2040.py

@@ -20,9 +20,11 @@ class KMKKeyboard(_KMKKeyboard):
     i2c = board.I2C
 
     # flake8: noqa
+    # fmt: off
     coord_mapping = [
      0,  1,  2,  3,  4,  5,  29, 28, 27, 26, 25, 24,
      6,  7,  8,  9, 10, 11,  35, 34, 33, 32, 31, 30,
     12, 13, 14, 15, 16, 17,  41, 40, 39, 38, 37, 36,
                 21, 22, 23,  47, 46, 45,
     ]
+    # fmt: on

boards/crkbd/main.py

@@ -8,7 +8,14 @@
 keyboard = KMKKeyboard()
 
 # Adding extensions
-rgb = RGB(pixel_pin=keyboard.rgb_pixel_pin, num_pixels=27, val_limit=100, hue_default=190, sat_default=100, val_default=5)
+rgb = RGB(
+    pixel_pin=keyboard.rgb_pixel_pin,
+    num_pixels=27,
+    val_limit=100,
+    hue_default=190,
+    sat_default=100,
+    val_default=5,
+)
 
 # TODO Comment one of these on each side
 split_side = SplitSide.LEFT
@@ -36,7 +43,8 @@
 RGB_VAI = KC.RGB_VAI
 RGB_VAD = KC.RGB_VAD
 
-
+# flake8: noqa
+# fmt: off
 keyboard.keymap = [
     [  #QWERTY
         KC.TAB,    KC.Q,    KC.W,    KC.E,    KC.R,    KC.T,                         KC.Y,    KC.U,    KC.I,    KC.O,   KC.P,  KC.BSPC,\
@@ -63,6 +71,7 @@
                                             KC.LGUI,   LOWER,  ADJUST,     KC.ENT,   RAISE,  KC.RALT,
     ]
 ]
+# fmt: off
 
 if __name__ == '__main__':
     keyboard.go()